How to Review a Renovation Contract Before You Sign: A Homeowner’s Clause-by-Clause Checklist

Most renovation contracts don’t cause trouble because of what’s written in them. They cause trouble because of what nobody noticed was missing, and by the time anyone does, the money is spent and the walls are closed.

The good news is that reviewing a contract isn’t a mystery. It’s a matching exercise with a few known trouble spots, and once you know the order to read it in, it takes about an hour for a typical remodel.

This guide gives you that order. You’ll get a step-by-step review method, a checklist of the clauses most homeowners skip (with the wording that should make you stop), and a plain answer on when it’s worth having someone else look at it. You’ll find more help with the paperwork side of renovating in our Navigating Contracts guides.

Before you start, gather three documents

Before you read the first line of the contract, put three things on the table: the contract itself, the bid or proposal it’s based on, and any plans, drawings or selection sheets your contractor has given you.

Here’s why. Most of a contract review is comparing what you were promised with what you’re about to sign. Anything that’s in the bid but not in the contract stops existing the moment you sign. If you haven’t compared bids in detail yet, our guide to reading a construction bid walks through it line by line.

Grab a highlighter and a pen, too. You’ll use them in every step.

Step 1: Check the scope against the bid, line by line

Start with the scope of work, because every other part of the contract depends on it. Price, schedule and warranty all refer back to what’s in scope.

Go through the bid one line at a time and find each item in the contract. Check it off when you find it. Circle it when you can’t. Then do three more passes:

  • Highlight every allowance. An allowance is a placeholder budget for something you’ll choose later, like tile or light fixtures. Each one should have a dollar amount, and the contract should say what happens if your choice costs more.
  • Read the exclusions on their own. The exclusions list is where costs move from the contractor’s column to yours. Permits, debris removal, patching and painting after electrical work, and appliance installation are common ones. We cover more of them in what a renovation quote doesn’t include.
  • Look for cleanup. The FTC’s consumer guide suggests a “broom clause” that makes the contractor responsible for cleanup and hauling away debris (FTC consumer guide, archived). If it isn’t written in, assume it isn’t included.

For what good scope language looks like, and the six other sections every contract needs, see the 7 things your renovation contract should always include. This step is about making sure the scope you agreed to is the scope on paper.

Step 2: Follow the money

Next, read every clause that moves money: the deposit, the payment schedule, the final payment and anything about extra charges.

The deposit. Our guidance is a deposit in the range of 30% to 50% of the contract, and that range includes purchasing all of the materials for the job. Ask your contractor what the deposit covers. If it’s large, you should be able to see that it’s buying cabinets, windows and other materials, not only starting the clock.

There’s an important legal check here, too. Some states cap deposits by law. In California, the down payment on a home improvement contract can’t be more than $1,000 or 10% of the contract price, whichever is less, according to a summary of state law from Bay Legal. In Massachusetts, a deposit can’t be more than one-third of the price, or the cost of special-order materials (Mass.gov). Before you sign, check your state’s limit with its consumer protection office or contractor licensing board.

The payment schedule. Payments should be tied to work that’s finished, not to dates on a calendar. The FTC suggests making payments “contingent upon completion of defined amounts of work,” so a delay in the schedule also delays the payment. Our guide to understanding your draw schedule shows what that looks like in practice.

How you pay. The FTC’s advice is direct: “Don’t pay cash” (FTC, Hiring a Contractor). A check or card leaves a record.

Lien releases. If your contractor doesn’t pay a subcontractor or supplier, they may be able to file a lien against your home. The FTC recommends asking the contractor and every subcontractor and supplier for a lien release or lien waiver. Here’s what a lien waiver is and when to ask for one.

Wording that should stop you:

  • “Payment due at the start of each phase,” with no definition of what finishing a phase means.
  • No final payment held back until the punch list is done. That last payment is your best bargaining power.
  • Any clause that lets the contractor demand the whole remaining balance early. Massachusetts bans this kind of clause in home improvement contracts.

Planning a renovation or new build? Get an expert set of eyes on your contract and budget before you sign.

Step 3: Check the clauses most homeowners skip

This is where most of the problems hide, because these sections sound like boilerplate. Read each one and ask the question next to it.

License and insurance

Is the contractor’s license or registration number in the contract? Massachusetts requires the registration number on the first page, and California requires license details in home improvement contracts. Then ask for proof of general liability insurance and workers’ compensation. Bay Legal lists inadequate insurance requirements as one of the main red flags for owners. If someone is hurt on your property and the contractor isn’t covered, you don’t want to find out whose policy pays.

Change orders

Does the contract require every change to be written, priced and signed before the work happens? If it allows “verbal approval,” ask for that to change. We go deeper in what a change order is and when to say no.

Delays and ending the contract

What happens if the work stops? Look for language on what counts as an acceptable delay, how you’ll be told about it and what happens if the contractor stops showing up. Then read the termination clause. Can both of you end the contract, and on what terms? Watch for termination rights that only run one way.

Disputes and arbitration

How will disagreements be settled? Look for a mediation step before anything more formal. If the contract requires arbitration, make sure you understand what you’re agreeing to before you sign. In Massachusetts, an arbitration clause in a home improvement contract has to be spelled out and signed separately by both sides. This is a good question to bring to a construction attorney.

Indemnity

Does an indemnity clause make you responsible for problems the contractor causes? Bay Legal flags one-sided clauses that require the owner to cover the contractor’s own negligence. If yours reads that way, mark it and ask a construction attorney about it before you sign.

Warranty

How long is the contractor’s warranty on their workmanship, and how do you make a claim? One year on workmanship is a common minimum, and the 7 things post explains why it should be separate from the manufacturer’s warranty on materials.

The right to cancel

If you signed at your kitchen table, check for a cancellation notice. Under the FTC’s Cooling-Off Rule, a sale of $25 or more made at your home, or $130 or more made at a temporary location like a home show, can in most cases be cancelled until midnight of the third business day after you sign, and the seller has to give you a cancellation form (Nolo). Some states add their own rules on top.

Blank spaces

Are there any blanks left in the contract? Massachusetts requires this warning right above the signature line: “DO NOT SIGN THIS CONTRACT IF THERE ARE ANY BLANK SPACES.” NARI’s homeowner checklist gives the same advice. Fill in every blank or cross it out before anyone signs.

Step 4: Ask for changes the right way

By now you have circles, highlights and question marks. Turn them into one short written list and send it to your contractor in a single message.

One list is easier for your contractor to answer than a dozen texts, and it gives you a record of what you asked for. Frame each item as a clarification, not an accusation. “Can we add the dollar amount for the tile allowance?” lands better than “Why is the tile allowance missing?”

Good contractors expect this. BuildZoom’s contract review guide notes that many contractors will clarify scope, payment schedules or roles even when they work from a standard template (BuildZoom).

Whatever you agree on goes into the contract itself, or into a written addendum that both of you sign. The FTC’s advice applies here, too: if a promise was made out loud, get it in writing. If you’d like help phrasing your list, our posts on questions to ask before you sign anything and how to negotiate with a general contractor are good companions.

When to get a second set of eyes (and whose)

Some contracts are short and simple, and this checklist is enough. Others are long, complex or full of language that leans one way. That’s when it’s worth having someone else read it, and it helps to know who reads what.

A construction attorney reads the legal terms: indemnity, arbitration, lien law and termination. If your questions are about what a clause means legally or whether it’s enforceable, that’s who to ask. BuildZoom notes that some attorneys review residential contracts for a flat fee.

An owner’s representative like Purple Door reads the contract from the construction side. Does the scope match the bid? Are the allowances realistic for what you’ve picked? Is the payment schedule tied to real milestones? Is the timeline believable for the work involved? Those are the questions we answer every day.

For a large or complex project, you may want both.

If you’d like us to look at yours, our By the Hour option starts at $150 per hour with a one-hour minimum, and a contract review is one of the most common reasons people book it. You can see all of our owner’s rep and contract review services here, and our guide to what an owner’s rep costs breaks down the math for bigger projects.

Already signed? Read it now using the same steps. Many gaps can still be fixed with a written addendum, and the best time to ask for one is before your next payment.

The one document that decides who pays

Your contract is the document everyone goes back to when something goes wrong. An hour with it, in the right order, with the bid beside you, puts you on the right side of that conversation.

If you’d rather not do it alone, send it to us before you sign. That’s what a By the Hour review is for, and we’ll tell you what’s there, what’s missing and what to ask your contractor about.

Frequently asked questions

How long does it take to review a renovation contract?

For a typical remodel, plan on about an hour with the bid and your plans beside you. A larger project, like an addition or a whole-home renovation, can take longer, because there are more allowances, exclusions and payment milestones to check.

Can I change a contractor’s contract before signing?

Yes. Send your requested changes in writing, and make sure whatever you agree on goes into the contract or a signed addendum. Many contractors will clarify scope, payment terms and roles even when they use a standard template.

Should a lawyer or an owner’s rep review my contract?

It depends on what you’re worried about. A construction attorney is the right person for legal terms like indemnity, arbitration and termination. An owner’s rep reviews scope, allowances, the payment schedule and the timeline. For a large or complex project, you may want both.

What if I already signed the contract?

Read it now using the same steps. Many gaps can be fixed with a written addendum that you and your contractor both sign. If you signed at home, check whether the three-day cancellation right applies, and get help before you make your next payment.

Work with Purple Door
Want an expert in your corner?

Book a free discovery call. Tell us about your renovation or new build, and we’ll help you spot what to watch for in your contract, budget and timeline, before you sign anything.